skript pro DTP

Master Alignment

Novinka

[Windows][Mac][InDesign][Zarovnání]

Panel nabízí další možnosti, které vám usnadní práci s objekty, a především živý náhled. Můžete si nastavit prostor, do kterého se mají objekty vejít, zrcadlit je, vytvořit z nich mřížku, duplikovat je na vybrané stránky a využít další a další funkce, které posouvají rozmisťování objektů zase o kousek dál. Moje oblíbená část: podržet Shift a zapnout si dočasný náhled. To je super. Adobe InDesign 18.5 a novější, Windows i macOS.

otevřít manuál ↗

cena

Zdarma

* Uvedené ceny nezahrnují poplatky za zpracování platby účtované platformou Gumroad.

Co skript umí

28 funkcí

Živý náhled

Hodnotu měníte a výběr se hýbe s ní — kolečkem nad polem mezery vidíte, jak se mezery roztahují
Najetí na tlačítko ukáže výsledek; uhnete a objekty se vrátí, kliknete a zůstanou
Stačí držet Shift a náhled je zapnutý jen po tu dobu — panel k tomu nepotřebuje zaměření klávesnice
Ať vyzkoušíte hodnot kolik chcete, v historii zůstane jediný krok Zpět

Hlídání prostoru

Ohrada kolem práce: stránka, dvojstrana, okraje nebo spadávka
Akce, která by objekt vystrčila ven, se neprovede — nic se nehne a viník zčervená
Stavový řádek řekne, o kolik milimetrů to přesahuje
S živým náhledem zůstane na stránce poslední hodnota, která se ještě vešla
Objekty, které byly mimo plochu už předtím, nechá panel na pokoji

Zarovnání a rozmístění

Šest ikon na zarovnání a šest na rozmístění, jako v nativním panelu InDesignu
Rozmístění na přesnou vzdálenost nebo na přesnou mezeru, zadanou číslem
Odsazení: zarovnaná hrana skončí o zadaný kousek uvnitř od okraje stránky, okrajů, dvojstrany či spadávky
Změřit přečte mezeru mezi prvními dvěma objekty do pole mezery
Vztažný bod je výběr, klíčový objekt, okraje, stránka, dvojstrana nebo spadávka — a panel u toho slovy řekne, co to znamená

Rozmístění, které InDesign nemá

Mřížka: sloupce a mezery X a Y, v pořadí čtení; až šest vlastních předvoleb mřížky
Rozpětí roztáhne objekty přesně na zadanou šířku nebo výšku a dopočítá mezeru
Stohování srovná objekty za klíčový objekt doleva, doprava, nahoru nebo dolů
Stejná velikost podle největšího, nejmenšího nebo klíčového objektu, s volitelným dopočítáním obrázku, aby se nic neořízlo
Přeházení: obrátit, zamíchat, podle velikosti nebo podle názvu z panelu Vrstvy — místa zůstávají, mění se jen kdo na nich stojí
Prohození dvou vybraných objektů i s jejich mezerou

Stránky

Zrcadlení doleva a doprava nebo nahoru a dolů, kolem výběru, stránky nebo dvojstrany — text zůstane čitelný, převrací se jen pozice
Přichycení do sloupců stránky, volitelně i s roztažením na šířku sloupce; protilehlé stránky si pohlídají vnitřní a vnější okraj
Duplikování výběru na zadaný rozsah stránek, volitelně zrcadleně
Přesun stejných objektů: na zadaných stránkách najde objekty se stejným názvem nebo stejným objektovým stylem a srovná je na stejné místo

Záchranná síť a zkratky

Snímek uloží, kde objekty stály, a Obnovit je tam vrátí — jedním krokem Zpět, ať jste mezitím dělali cokoli
Posledních pět snímků zůstane po ruce s časem a počtem objektů
Oblíbené akce pod klávesovými zkratkami 1 až 8 (Úpravy → Klávesové zkratky)
Adobe InDesign 18.5 a novější, Windows i macOS, česky i anglicky, zdarma

Historie změnv0.10.2

0.10.2

Move Same also finds twins inside groups, matches the style by identity as well as by name, and when it finds none it lists which styles the objects on those pages actually have.

0.10.1

Move Same says exactly why it did nothing: a one-page document, a range without other pages, a [None] style, or which name / style it looked for on which pages.

0.10.0

**Keyboard shortcuts for Favourites.** The plugin registers commands Favourite 1–8 (Edit → Keyboard Shortcuts → Product Area "Plug-Ins" → Zalesky Workflow). Give them keys and each runs the n-th pinned button.
**Offset** in the Align row: against the Page, Margins, Spread or Bleed the edge lands this far inside the reference edge. Live Preview works with it.
**Span**: spread the objects evenly over an exact width or height - sizes stay, the gaps change. The status bar says what gap came out; when the objects alone are wider than the total, it says so.
**Grid presets**: the + beside Make Grid saves Columns, Gap X and Y under a name; click a preset to use it, right-click to remove it. Up to six.
**Snapshot history**: the last five snapshots stay as chips with time and object count. Click one to restore it, right-click to forget it. Restore takes the latest.

0.9.3

The LIVE PREVIEW switch is a square button like the others, not a pill.

0.9.2

A **scrollbar** when the panel is lower or narrower than its contents. The top bar and the status bar stay put; the sections scroll between them.

0.9.1

The quick-value buttons (0 / 2 / 3 / 5) are gone, and with them the "Quick values" setting. The arrows, the wheel and typing cover it.

0.9.0

**Align To moved up into the top bar**, next to Keep objects in - both say what the tools work against, and now they stand together. The rows below are actions only.
**Fields stand in one column.** The icon groups of Align, Distribute and Spacing share one width, so Distance and Gap sit under each other; Grid's Columns and Stack's Gap line up too.
The two "Use Spacing" boxes are now **Distance** (Distribute) and **Gap** (Spacing), so you can tell them apart.
**Direction buttons carry an arrow**: Stack Left / Right / Up / Down and Mirror Left ↔ Right / Top ↕ Bottom.
**Key object awareness**: the top right says "key set" or "no key"; with Align To = Key Object or Same Size as the Key and no key chosen, the buttons dim and the tip says how to set one.
**Empty Favourites fold themselves away**; the header says how to fill them, and a one-time tip says it at first start.
**Panel size 90 %** for laptops.
**Quick values go into the gap field you used last** (Distance, Gap, Grid gap X / Y, Stack gap) - the field is outlined in blue.
The status bar shows the standing state on the right: Align To and Keep in.
Measure says which two objects it measured and whether side by side or one above the other.
Fit content moved behind Width / Height / Both so it no longer reads as a fourth size choice.

0.8.0

**Manual** (English and Czech) ships with the plugin: panel menu → Manual… opens it in your browser.
Panel menu → **Open log…** opens the log file; About opens a window. Both used to write only to the status bar, which looked like nothing happened.
Align To explains itself: the text beside the icons says what the choice means, and each icon has a full tooltip.
The log file is `log_master-alignment.txt`.

0.7.0

Renamed to **Master Alignment** (was Smart Alignment). It is a new plugin id, so remove the old one from the UXP Developer Tool and load this manifest; settings and Favourites start fresh.

0.6.2

Fit content scales the picture proportionally so all of it stays visible - nothing is cropped (0.6.1 filled the frame and cut the picture).

0.6.1

Same Size has a **Fit content** switch (Auto-Fit): on, a picture in a resized frame is scaled with it; off, only the frame changes and the picture stays as it was. Empty frames, text frames and groups are not touched by it.
The switch at the top reads LIVE PREVIEW.

0.6.0

**Favourites**: a new first section. Right-click any button to pin a copy of it there, right-click the copy to take it out. The copy is the same button and reads the same fields.
Distribute icons are drawn with two objects, as in InDesign.
**Log file.** Everything the panel does - clicks, live steps, Keep in checks, errors, layout changes, with timings - goes to `master-alignment.log` in the plugin's data folder. The path is in Settings and under "Where is the log?" in the panel menu. Send it along with a bug report.
Align to Bleed and Keep in Bleed say "This document has no bleed" instead of quietly using the page edge.
Live Preview no longer flashes between the old and the new position: the step back and the new step are drawn as one.
A fast run of arrow clicks no longer piles up - one live step runs at a time and the last value wins. A held arrow stops repeating when the mouse is released anywhere.
The wide layout now needs 1400 px (Favourites take room); the default panel is 1500 px wide.

0.5.0

**The panel adapts to its width.** Wide: the three sections side by side. Narrower: one under another, every tool still on one line. Narrow (a docked side panel): the tool's name sits above its row and the buttons drop to a line of their own. Nothing is ever cut off.
**Sections fold away.** Click a header (Align & Distribute, Arrange, Page) to hide what you do not use; the panel remembers it.
**You can see what belongs to what.** Point at a button and the fields and switches it reads light up in blue - Make Grid lights Columns, Gap X and Y; Distribute lights Use Spacing and Align To.
**Buttons that cannot run yet are greyed out**: with one object selected, everything that needs two or more is dimmed, and pointing at it says how many to select. The top right of the bar shows how many objects are selected. (Can be switched off in Settings.)
Tidier top bar and headers; the status bar has its own background.

0.4.1

With LIVE switched on for good, pointing at a button previews it again (no Shift needed). Shift still turns Live Preview on for as long as it is held.
Order by Name: objects that have no name, no text and no image (a plain group, an empty frame) now go last, in the order they stand, instead of first.

0.4.0

**Hold Shift for a temporary Live Preview.** The LIVE button lights up green while Shift is down and goes dark when you let go. With Shift held, the arrows and the wheel move the objects at once and pointing at a button shows its result.
Ten-times steps moved from Shift to **Alt** (Option on a Mac), so the two do not clash.
A cleared field is **0**: it counts as 0 straight away, and Tab, Enter or a click elsewhere writes the 0 in. Only something unreadable turns red and goes back.
Messages moved to a **status bar at the bottom** with room for three lines, so nothing is cut off at the edge of the panel. The gap sizes are written there too.
**Panel size 100 / 110 / 120 %** in Settings.
Settings are laid out in sections (Panel, Values, Status bar, Objects), and their text is readable in every theme. "Write the gap sizes between the objects" is under Status bar.
Page / Spread / Margins / Bleed are clearly greyed out and cannot be picked until "Keep objects in" is ticked.

0.3.0

A much clearer panel: three columns (Align & Distribute, Arrange, Page), and every tool is one row – its name on the left, then what you set, then what you click.
Buttons whose icon said nothing now say what they do: Make Grid, Left / Right / Up / Down, Width / Height / Both, Reverse, Shuffle, By Size, By Name, Swap, Duplicate, Move Same.
"Same size as the Largest / Smallest / Key" is a clear one-of-three switch, no longer three more icons.
Align To shows the name of what is chosen.
All value fields have the same width.

0.2.0

The panel is cut into segments with headings, like InDesign's own Align panel, instead of a box for every feature. All of it fits in one row at full width.
**Keep in Page / Spread / Margins / Bleed**: objects may not leave the chosen area. An action that would push them out is refused, and the value to blame turns red (a 16 mm gap on a page it cannot fit on, for example). With Live Preview the last value that fitted stays on the page.
**Hold Shift over a button to preview it.** Pointing alone no longer moves anything; let go of Shift or move away and it goes back, click to keep it.
The gap slider is gone. Every value field has InDesign-style up/down arrows (hold to repeat) and reacts to the mouse wheel; Shift steps ten times. The step is in Settings.
Clearing a field no longer turns it into 0 or an error: nothing happens while it is empty, and leaving it brings the last value back. Esc does the same.

0.1.0first test build

A wide copy of InDesign's Align panel: Align To (Selection, Key Object, Margins, Page, Spread, Bleed) as icons, Align Objects, Distribute Objects and Distribute Spacing, with Use Spacing.
**Live Preview**: change a value (field, arrows, slider or a quick value) and the selection moves at once; hover a button to see what it would do. Every change stays a single Ctrl+Z.
Gap slider with an adjustable step (0.1–10, in document units), quick values 0 / 2 / 3 / 5 and "take the gap from the selection".
Grid: lay out the selection in columns with X and Y gaps.
Match Size: same width, height or both – to the largest, the smallest or the key object. A group is resized as a whole.
Stack to Key: line objects up left, right, above or below the key object with a set gap.
Reorder: reverse, shuffle, by size or by name – the objects swap places, the places stay.
Mirror & Swap: swap two objects, mirror the layout around the selection, page or spread.
Page Columns: put each object into a column of its page, optionally as wide as the column.
Across Pages: duplicate to a range of pages (2-5, 8, 10-), or move same-named objects to the same place, mirrored on facing pages.
Snapshot: save positions and restore them.
Settings in the panel menu, including an optional gap readout and an off-page warning.